Performance and Quality
Longboard Fins

Garrett Spencer Flex
Full base with a narrow tip that is more "straight up" than other flex fins.
size: 9.5", 9", 8"


Full based old school template with snappy flex tip
size: 10", 9.75"

Originally designed as a single fin for small spoon boards in the 70's.  With the advent of the tri fin longboard, the smaller versions were introduced to add extra snap on turns.  One of our favorites
size: 9.5", 8.5", 7.5", 6.5"

Justin Quintal Flex
A vertical flex fin that offers a quick fluid feel when going through turns and down-the-line
size: 10.5", 9.5", 8.5", 7.5"

Marc Andrieni Flex
aka: AFlex
This sweet flex fin can be used as a single fin for a 2+1 set up.  Great flex
size: 9.75", 9.25", 8.75", 8.25", 7.75"

Mikey DeTemple Flex
A vertical flex fin with a narrow flexy tip.  Excellent for quick turns.
size: 10.5"

Rusty Preisendorfer

Rusty designed this series of performance flex fins that focus on optimal flex and plenty of solid.  Use this fin on your 2+1 longboard or a single fin
size: 9", 8", 7", 6.25", 5.5"

Mikey Detemple MD3
A must have for your longboard.  Nice wide base for hold with a flexy tip to provide that snap on the turns.
size: 10", 9", 8", 7"

Michel Junod Flex
The wide base gives excellent drive out of bottoms turns, while the narrow flex tip is loose and responsive off the top.
size: 9", 8", 7"



            This straight up vintage style fin is perfect for your old school longboard or collectable.  Step back and turn, than get to the nose.

Size: 8.5”

Pivot Original

            A progressive performance fin with a classic feel.  It’s fast turning with lots of hold for noseriding.

Size: 9.5”

Dog House

   A fun full based rake fin for cruising down the line or carving up your favorite spot with Dog House style.

Size: 9.75”, 9.25”, 8.75”

Dano Noseglider

     The name says it all...... Noseglider = classic longboard with nose time.

Size: 10"

Mikey Detemple PORK CHOP
  This fin has a very snappy, quick and tight turning radius.  This fin has great rail to rail response when riding the nose.

Size: 10.0


            One of the favorites! The sweep gives you an easy turning fin with just enough base area for that hold

Size: 9.5”, 8.75”

Michel Junod #17

     A pivot style fins for quick turns and cutbacks, but also has plenty of hold for noseriding.  This is Junod’s most popular pivot fin.

Size: 10"

El Gato

            This vintage style single fin that is a must have for noserides and traditional longboards.

Size: 9.5”

Pivot Grande

            The largest of the Pivot line for getting more noserides and tip time.  The rake helps you turn your board from the tail.

Size: 10.75”

Rainbow Rake

   Designed for all sizes of boards.  Great, solid, all-around fin.  Larger sizes for single fin boards, while the smaller are good for 2+1’s.

Sizes: 9”, 8”, 7”, 6”, 5”

Garrett Spencer Noserider

Full base with classic rake. This fin is designed to hold while providing long noserides and smooth classic trimming.

Size: 9.5”


     Reynolds Yater template can be used on your modern, classic or your retro single fin board.

Wood construction only.
Size: 10" 9" 8"

Robert August

A full classic raked template for added hold and power turns.

Size: 9.5”, 7.5”


    This is one of our favorite fins that combines a rake and pivot design.  The Nomad powers on cutbacks, smooth turns and down the line surfing.

Size: 10.25”

Ashley Lloyd
Your everyday longboard fin for riding the nose and smooth down the line trim.
Size: 9.5


            This noserider fin is quick turning while maintaining solid nose riding stability.  It works best on long point breaks.

Size: 9.5”

* shown in stained glass

Pivot 10.0

  The Pivot line needed this size.


The Azul template has more area and a little more rake than the Rainbow Rake.  Perfect for modern single fin longboards or your performance tri fin.
Sizes: 10”, 9”, 8”, 7.5”, 7”, 6.5”, 6”

Dano Old Pleasure

     A classic pivot template for added hold, easy turns while still being a great noserider.  Simply, an Old Pleasure.

size: 10"

Gerry Lopez
     Designed by famed surfer/traveler Gerry Lopez. This upright slightly retro design is quick turning and reliable on a wide variety of boards.
Size: 8.5”, 7.75”, 7.25”

Skeg Reverse

     Classic and timeless.  For your old-school longboard.  Massive Tip time!

Size: 9.5”

Wingnut Longrake

   The updated LongRake has more base for increased drive, a more verticle  and thinner tip making it more responsive.

Size: 10", 9", 8"


  Center fin for your bonzer

size: 7" 6.5

* shown in bamboo

RFC Cutaway

     This fin is great for tri fin set ups that make the board very loose and turn easy.

size: 10" 9" 8.5" 8" 7" 6"

Mysto Cutaway

     A high aspect performance fin that's suited for hollow, pushy conditions.  Unreal at your local beach break or on your SUP

size: 10", 9", 8", 7.5", 7", 6.5"

Wingnut Cutaway
I wanted to increase the drive from the Cutaway Fin Series….I still love the looseness from the “negative space” below the tip but wanted more drive in my turns….the answer was increasing the base...
an be used as a single fin or 2+1

Size: 10", 9", 8", 7"